A lifting magnet 30 kg is a hand tool: you hold it by the handle, set it on a steel sheet and lift the sheet without touching its edges. Once the part is down, you press the black lever and the magnet lets go straight away. That way you move sheets, plates and steel parts with sharp edges without cutting your gloves or your fingers. It needs no power: the holding force comes from a neodymium magnet.
What you use a lifting magnet 30 kg for
In every sheet metal shop there are pieces you move dozens of times a day: from the stack to the cutting table, from the guillotine to the press brake, from welding to painting. Every touch of a freshly cut edge is a risk. A magnetic lifter with handle keeps your hand away from the edges and gives you a safe grip on a smooth surface you could not otherwise hold.
- Cut sheets and plates. You lift them from the stack and place them on the workbench.
- Parts with sharp edges. You move them without touching their edges.
- Warm parts after cutting or welding. Only below 80°C, the working temperature of the magnet.
- Large sheets, with two people. Two people, each with a magnet, carry a large sheet easily.
How the quick release works on a lifting magnet 30 kg
The base is a grade N35 neodymium magnet, ⌀70 mm, set in a steel housing. The housing concentrates the magnetic field towards the bottom face, so the force works only where it touches the part. The handle sits on top, with a black release lever under it.
- Attach: you place the magnet on the part and it grips on its own.
- Lift: you hold the handle and move the part where you need it.
- Release: you press the quick release lever and the magnet comes off the part.
Unlike a magnet without a mechanism, you do not have to pull it sideways to get it off. This matters most on thin sheets, which would otherwise bend.
What 30 kg means
The force of a lifting magnet 30 kg applies in good conditions: steel with a high iron content, clean, flat and at least 10 mm thick. On a thinner sheet the magnet cannot use its whole field, so the force drops. The same happens on rusty, painted or oily surfaces, because an air gap forms between the base and the part.
The exact data is in the Additional information tab: the ⌀70 mm base, the 160 mm width, the 120 mm height, the 30 kg force, magnetisation grade N35, the minimum part thickness of 10 mm and a working temperature of up to 80°C. Above 80°C a neodymium magnet starts to lose strength, which is why it is not meant for hot parts. You can read more about this on the neodymium magnet page on Wikipedia.
Simple rules for a lifting magnet 30 kg
- check that the part weighs less than 30 kg and is as thick, clean and flat as possible;
- place the base in the centre of the part, so it does not tilt;
- wear work gloves, even if you do not touch the edges;
- never lift the part above other people;
- keep the magnet away from phones, cards and pacemakers;
- store it on a surface that is not steel, so it does not collect swarf.
Other magnetic lifting tools
Besides a lifting magnet 30 kg, there are other tools for the same job. If you like working with a magnetic lifter with handle, for thin sheets and small parts there is the magnetic handle for lifting sheet metal, our best seller in this range. For heavier parts, choose the 100 kg magnet with handle. For plates you can no longer carry by hand, you need a device that hangs on a crane, such as the 100 kg permanent lifting magnet. All of them are in the lifting magnets category. For welding, the welding magnet with ON/OFF switch comes in handy, and you pick up dropped screws with the magnetic collector with release mechanism.
How to pick the right lifting tool is explained in our guide permanent lifting magnet: how to choose. On hobber.ro you will also find a guide to magnets for lifting loads (in Romanian).
For workshops and companies
A lifting magnet 30 kg at every workstation, that is a magnetic lifter with handle and quick release, means fewer cuts on hands and faster handling of parts. If you need several pieces for your team, write to us for a quote. Schools and institutions are welcome too.
We attract your ideas and help you make them happen!
Română
















Reviews
There are no reviews yet.